This high cost-effective PET single-sided silicone release film has mainly been applied in the following areas:
1. Electronics:
In the manufacturing of electronic products, PET release film can be used to protect sensitive components like circuit boards and
semiconductor chips. It also provides easy-release characteristics during assembly and processing.
2. Labels and stickers:
This release film makes it easier to peel off labels and stickers without leaving behind adhesive residue or damaging the surface of the
adhered object.
3. Printing and packaging:
This PET release film can be used as a substrate for printing to better adhere ink or coating, and can be easily separated during
subsequent processing.
4. Automotive and aerospace:
This release film is used for automotive and aerospace applications, such as protecting components and sound/heat insulation.
5. Medical and health care:
In the manufacturing of medical equipment and packaging for healthcare products, PET release film provides a sterile environment and
prevents contamination.
These are just some common applications of PET release film, as specific application scenarios may differ based on performance and customer requirements.
| Test Item | Unit | Standard index | Test result | Test Method |
| Measured Value | μm | M ± 2% | 23.05 | ASTM D-374 |
| Tensile Strength | MD | Mpa | ≥180 | 188 | ASTM D-882 |
| | TD | Mpa | ≥200 | 224 | |
| Elongation @ Break | MD | % | ≤200 | 133 | |
| | TD | % | ≤200 | 123 | |
| Elasticity Modulus | MD | Mpa | ≥3500 | 4773 | |
| | TD | Mpa | ≥3500 | 4646 | |
| Thermal Shrinkage | MD | % | ≤1.5 | 1.70 | 150℃/30min |
| | TD | % | ≤0.5 | -0.16 | |
| Haze | % | ≤5.0 | 5.23 | ASTM D-1003 |
| Light transmittance | % | ≥88 | 91.5 | ASTM D-1003 |
| Glossiness (45°) | % | ≥80 | 95.6 | ASTM D-2457 |
| Clarity | % | ≥90 | 92.6 | ASTM D-1003 |
| Friction Co-efficiency | μs | - | ≤0.65 | 0.108 | ASTM D-1894 |
| | μk | - | ≤0.50 | 0.102 | |
| Coating weight | g/㎡ | 0.075~0.2 | 0.182 | FTM7 |
| Release Force (after 20min.) | g/25mm | 5~15 | 12.269 | FTM 1 (w/out briquette) |
| Subsequent adhesion rate | % | ≥88 | | GB/T 25256-2010 |
Digital Brochure (2023).pdf
Product Tags:
|
|
23 μm Clear PET Single Side Silicone Coated Release Film, For Tape And A Wide Range Of Surface Protection Applications Images
|
